Sales Phone: (03) 9751 1964 E-Mail: sales@argyleloco.com.au
|
||||
The Sunset Valley pneumatic switch operating system is a simple and robust way to remotely operate your garden gauge turnouts (switches). It is a lot easier to install than electrical systems, and will work much better in the garden environment without shorting, corroding or breaking, and it uses industrially rated components for reliability and long life. The system will work with all popular makes of G gauge switches. |
||||
.JPG) Larger Image  Larger Image |
Installation is very simple. All you need is an actuator, a toggle switch, some hose, and a compressed air supply (The hose can be up to 200 ft. long). The toggle switch either applies or releases air pressure to the actuator, which throws the turnout. An internal stainless steel spring in the actuator resets the turnout when pressure is released. Usually you will want to control several turnouts; this is achieved by the use of a manifold as shown. Connecting a hose is easy, just push it over the barbed fitting for a permanent join. The user needs to provide a small compressor to supply air at 30psi to the system. Instructions |
|||
Prices - are in Australian Dollars and inclusive of 10% GST. 'In Stock' - prices are firm, other prices are approximate and subject to exchange rates and other variables. 'Available' - means items are in stock at manufacturer, ordered on request. 'POA' - Price on Application Minimum Sale - Product $20, Post $10 |
||||
| Code | Description | Price | Stock | |
 Larger Image |
Actuator ELL |
The actuator is screwed to the headblocks of the turnout and the throw pin is inserted into a hole drilled in the throwbar. Up to 1/2” movement is possible, most turnouts need about 1/4". A right angle elbow (ELL) can be fitted so the hose enters from the bottom or side. |
A$42 A$6 |
In Stock |
 Larger Image |
Toggle |
The toggle switch is mounted on a panel for convenience. Connect the back port to the supply and the side port to the turnout. |
A$32 | In Stock |
 Larger Image |
Hose |
The hose is UV resistant, brown coloured polyurethane. Simply push onto the barbed fittings of components for a permanent join. |
A$2.40 per meter |
In Stock |
 Larger Image |
Manifold 4 Manifold 8 Manifold 12 |
Manifolds are used for controlling multiple switches. Four sizes are available, with 4, 6, 8 or 12 outlets. Connect unused pairs of parts on the manifold with short pieces of hose. |
A$24 A$28 A$36 |
In
Stock in Stock Available |
 Larger Image |
Adaptor |
Adaptor set to connect the system to an air compressor. Adaptor has a 1/8”NPT and a ¼” NPT male fitting. |
A$8 | In Stock |
 Larger Image |
Tee Union |
Use a tee to operate two turnouts simultaneously from one joggle switch. Use a union to join two pieces of hose. |
A$6 A$4 |
In Stock |
